Stuck Case Remover - RCBS

Extracts stuck cases from standard sizer dies without damaging the die using a very simple two step removal process. This item will work with any brand of die.

Includes:

• Tap
• Drill bit
• Allen screw
• Allen wrench and remover

Instructions for use

1. Unscrew the expander-decapping rod until the decapping pin is free of the primer flash hole in the stuck case
2. Secure the reloading die in a vice and drill the case head with the included drill bit
3. Drill straight through the primer pocket and the primer flash hole
4. Next tap the case head the included 1/4-20 tap
5. Place the stuck case remover body onto the case head and turn the cap screw with the allen-type wrench until the case is pulled from the die
6. Discard the case and reassemble the die